W&H Impex
-
Very easy to operate and use
To replace a consumed filter cartridge,open the locking handle.
Turn the locking handle as far as it will go, then press the rinse button to release the pressure and take the filter head off the consumed filter cartridge.
Once you have pulled off the protective cap, place the filter head vertically onto the new cartridge. Multidem is then ready to go again.Your advantages at a glance
- Consumed filter cartridges can be replaced quickly and easily without tools.
- Multidem is suitable for use with many conventional autoclaves and purification units.
- The spray gun can also be used to fill the sterilizers manually with demineralized water.
- For Multidem no external power supply is required.
- The water demineralizer system delivers consistently high water quality thus preventing limescale deposits in the sterilizers.
Suitable for use with conventional autoclaves and purification unitsMultidem – Compatible with all units
1. Direct connection
Multidem can be connected directly to Lisa Fully Automatic units and to all sterilizers with automatic water filling.
2. Via a connection system
The Lisa, Lisa 300 and 500 and Lina autoclaves can be connected to the Multidem unit using water supply connection kit (SAT/water supply kit).
3. Manual filling
The Lisa MB sterilizer and all sterilizers without automatic water filling can be filled with the aid of the spray gun.
The innovative locking handle on the filter head ensures fast and convenient filter replacementFilter head – Very easy to operate and use
The innovative locking handle on the filter head ensures fast and convenient filter replacement without tools.
The integrated rinse button for releasing the pressure makes short work of pre-rinsing and venting.
![Multidem C27]( "Multidem C27")
Multidem C27
Water supply for W&H sterilizers
or other brand sterilizersMultidem C27
REF 90000362consists of: filter head, cartridge with 2.7 kg,
tubes, connectors (incl. Water Block®) and 3 bar pressure reducer.Download Area
FAQs
Instructions for use
Find all languages of the Update Hygiene and Maintenance (EN ISO 17664:2017) in the Download Centre.
Downloads
-
Technical data
Multidem C27 Water treatment principle: Demineralization Direct connection to sterilizer: 
Number of connectable sterilizers: Up to 2 units Possibility of manual filling:
(spray gun)
Demineralised water according to EN 13060, ANSI/AAMI ST55:
Water quality (in): Drinking water Water quality (out): 0.5–2 µS/cm Water pressure (min./max.): 2–8.6 bar Water temperature (inlet): 4–30 °C/40–86 °F Produced water: 60 litres/1 h Volume storage tank: – Main device dimensions (w × h × d): 12.4 × 12.3 × 47.6 cm Water tank dimensions: – Weight: 2.7 kg Operating position: Vertical Wall mount: No Electrical supply needed: No Electrical power supply: – Water Block® safety valve:
Backflow preventer according to EN 1717:
