W&H Headquarters - EN
-
Instruments for bone surgery
B1 (REF 05530100)
- Fine-toothed saw for fine cuts, with little bone loss when harvesting bone blocks.
B2R, B2L (REF 06958600, 05544400)
- Fine-toothed instrument for horizontal cuts, with little bone loss, in hard-to-reach areas. Right-curved and left-curved models available.
B3 (REF 05542100)
- Sharp instrument for modelling and contouring the bone surface, as well as for collecting bone chips.
B6, B7 (REF 07022500, 07022600)
- Special saw for fine and deep cuts in record time. Especially suitable for harvesting bone blocks, splitting the alveolar ridge, separating tooth roots and for root-tip resections.
Instrument kit »Bone« (REF 07173100)
- Consists of: B1, B2R, B2L, B3, B4, B5
Instruments for lateral sinus lift
S1 (REF 05542900)
- Diamond-coated instrument for preparation of a bone flap for lateral sinus floor augmentation and for crown edge extensions.
S2 (REF 05534700)
- Instrument with diamond-coated ball for preparation of a bone flap for lateral sinus floor augmentation and for crown edge extensions.
S3 (REF 05508200)
- Instrument for gentle detachment of the Schneiderian membrane from the bone. The coolant film protects the Schneiderian membrane by means of three coolant openings.
S4 (REF 05542300)
- Instrument with rounded edges for atraumatic detachment of the Schneiderian membrane.
S5 (REF 05542800)
- Instrument with rounded edges for atraumatic detachment of the Schneiderian membrane.
Instrument kit »SPECIAL« (REF 07173200)
- Consists of: S1, S2, S3, S4, S5
Instruments for extraction
EX1 (REF 06069300)
- Instrument for atraumatic tooth extraction to preserve the alveolar bone.
EX2 (REF 06071100)
- Instrument for atraumatic tooth extraction to preserve the alveolar bone.
Instrument kit »EX« (REF 07173500)
- Consists of: EX1, EX2
Instruments for retrograde endodontics
R1D (REF 05975200)
- Angled, diamond-coated instrument for retrograde root canal preparation.
R2RD (REF 05991000)
- Slightly right-curved, diamond-coated instrument for retrograde root canal preparation.
R2LD (REF 05999400)
- Slightly left-curved, diamond-coated instrument for retrograde root canal preparation.
R3D (REF 05998800)
- Angled, diamond-coated instrument for retrograde root canal preparation.
R4RD (REF 06005000)
- Strongly right-curved, diamondcoated instrument for retrograde root canal preparation.
R4LD (REF 06004700)
- Strongly left-curved, diamond-coated instrument for retrograde root canal preparation.
Instrument kit »Endo« (REF 07173300)
- Consists of: R1D, R2RD,R2LD, R3D, R4RD, R4LD
Instruments for surgical periodontology
P1 (REF 06067700)
- For removing concretions in the subgingival region. Ideal for treatment of deep, periodontal pockets.
P2RD (REF 06061700)
- Right-curved, diamond-coated tip for periodontal debridement. Especially suitable for open root planing.
P2LD (REF 06061800)
- Left-curved, diamond-coated tip for periodontal debridement. Especially suitable for open root planing.
Instrument kit »Paro« (REF 07173400)
- Consists of: P1, P2RD, P2LD
Preparation of the implant site and crestal sinus lift
I1 (REF 07786800)
- Diamond-coated instrument with depth marks for pilot preparation with the correct axial alignment.
Z25P (REF 07785600)
- Diamond-coated instrument for expansion of the pilot hole (up to a diameter of 2.5 mm) in the cortical area.
I2A, I2P, I3A, I3P (REF 07797800, 07788800, 07885600, 07887000)
- Instruments for gradual preparation of the implant bed (2 to 3 mm) up to the desired depth.
A = anterior region
P = posterior region
Z35P (REF 07980600)
- Diamond-coated instrument for expansion of the pilot hole (up to a diameter of 3.5 mm) in the cortical area.
I4A, I4P (REF 07889400, 07889500)
- Instruments for preparation of the implant bed (4 mm) up to the desired depth. A = anterior region P = posterior region
Z25P, Z35P (REF 07785600, 07980600)
- An instrument which is diamondcoated on the front face with internal coolant supply for preparing the base of the sinus and for lifting the Schneiderian membrane using a cooling medium.
Instrument kit »Implant/Crestal A« (REF 07997090)
- Consists of: I1, I2A, I3A, I4A, Z25P, Z35P
Instrument kit »Implant/Crestal P« (REF 07997110)
- Consists of: I1, I2P, I3P, I4P, Z25P, Z35P
Download Area
